Plumbing installation in Smyrna, GA covers the work that adds or moves plumbing rather than fixing something broken. That includes a new bathroom, a relocated sink, a laundry hookup, a hose bib or the rough-in for an addition. It is planned work, and we treat it that way, with a clear price and a plan before any pipe is cut.
If you have a failure right now, such as a burst line or a backed-up drain, call the 24/7 line instead. Installation is a calmer conversation about what you want built and how it connects to what you have.
What counts as a plumbing installation
The word covers a lot of jobs. We split them by how much plumbing changes. A new faucet or toilet uses the existing lines. A new bathroom needs fresh supply and drain branches, a vent and a tie-in to the building drain.
| Project | What is involved | Ask the city |
|---|---|---|
| New fixture on existing lines | Fixture, supply line, shutoff and tailpiece | Ask the Smyrna Building Division. |
| Bathroom add | New supply, drain, vent and a tie-in | Ask the Smyrna Building Division. |
| Kitchen sink relocation | Move supply and drain, adjust venting | Ask the Smyrna Building Division. |
| Washer box and drain | Supply valves, standpipe and trap | Ask the Smyrna Building Division. |
| Hose bib or outdoor faucet | Tap into supply, install frost-proof bib | Ask the Smyrna Building Division. |
| Addition rough-in | Supply, drain and vent before walls close | Ask the Smyrna Building Division. |
How a project moves from call to inspection
We use the same sequence on most jobs, so you know what to expect.
Permits and inspections in Smyrna
The City of Smyrna Community Development Department handles permits at 3180 Atlanta Rd SE, and its Building Division page says the city has adopted the 2024 International Plumbing Code (IPC) with Georgia amendments. Applications are submitted through the online portal, because in-person submittals are no longer accepted.
For you, that means the permit question starts online, not at the counter. The page says a permit is needed for projects involving two or more licensed trades, and it does not list plumbing jobs one by one. Ask the division at (678) 631-5387 whether your job needs one, because the answer shapes the schedule.
Inspections are also scheduled in the portal, so we plan rough-in work around the inspection window and tell you the sequence up front.
Rough-in plumbing before the walls close
Rough-in is the pipe that goes inside walls and under floors before drywall. It is the stage where mistakes are cheapest to fix and the stage the inspector usually wants to see. Supply lines are sized for the fixtures they feed. Drains need the right slope and a vent.
In an addition, rough-in happens early and then waits for framing, electrical and insulation. We coordinate with your builder so the plumbing is in place and tested before the wall closes.
New construction plumbing
New construction is a smaller part of what we do, and it works differently. The plans come from the builder, the permit is usually pulled by the general contractor, and the inspection schedule is fixed by the project. We can bid rough-in and finish plumbing and work to the plans you give us.
If you are building and still choosing fixtures, call before the rough-in is scheduled. Fixture rough-in dimensions differ, and changing a toilet or a vanity after the pipes are in is a more expensive conversation.
Bathrooms, kitchens and laundry areas
A bathroom add is the most common installation we are asked about. It needs a toilet drain, a shower or tub drain, a sink drain, a vent and a supply that feeds hot and cold. The distance to the main stack decides how complex it is.
A kitchen sink relocation or a laundry hookup is simpler but still needs a vent and the right trap. A washer box with a proper standpipe keeps hoses out of sight and reduces the risk of a burst hose.
Hose bibs, outdoor faucets and PEX supply
A frost-proof hose bib tapped into the supply lets you water a garden without dragging a hose through the kitchen. After the Christmas 2022 freeze, when pipes burst at hundreds of Cobb buildings, we advise installing bibs that sit on the warm side of the wall and are easy to drain.
PEX is the common modern supply pipe for new work. It bends around corners, resists corrosion and uses fewer fittings than copper. We use it for most additions, and we use copper where the existing system calls for it.
How to prepare before our visit
A few minutes of prep helps us give you a clear price at the visit.
- Take photos of the room and note where you want new fixtures.
- Know the fixture models you want, or ask us about rough-in dimensions.
- Find the main shutoff and tell us where it is.
- Clear a path to the work area, including the attic or crawlspace.
- Ask your builder or HOA about any restrictions on exterior work.
Planning an addition or new fixtures?
Call (770) 214-4545 to talk through your project. If something is leaking now, the 24/7 line is open.
What changes the price of installation work
You get a clear price before work starts. The factors that move it:
Insurance note: installation is a planned improvement and is not an insurance claim. If an installation fails and causes sudden water damage, check your policy. For your real number, call (770) 214-4545.
Where we work and related pages
We take installation jobs across Smyrna, in Vinings and Austell, and in Mableton, covered on our Mableton page. If a new bathroom involves old pipes, see repiping and water heater installation.
If a lingering leak is behind a project, our leak detection service finds it before the walls are closed.
Installation questions
Same-day appointments are available when the schedule allows. Larger projects need a walk-through first, so call (770) 214-4545 and we will tell you what we can fit in.
Ask the Smyrna Building Division, (678) 631-5387. The city has adopted the 2024 International Plumbing Code (IPC) with Georgia amendments, and applications go through the online portal.
Inspections are scheduled in the City of Smyrna online portal. We plan rough-in work around the inspection and tell you the sequence before we start.
PEX is common modern supply pipe. Your inspector reviews the job to the adopted code, and we choose materials that match it.
Often yes, depending on access. We plan the run, install the valves and standpipe, and test for leaks before we leave.
Call before rough-in. Fixture dimensions affect where pipes go, and changing a model after the pipes are in costs more.
Have a plumbing problem right now? The line is open 24/7.
Call (770) 214-4545